Selecting your rangehood

Home of the quiet rangehoods. Schweigen have developed a range of rangehoods that has removed the noise from the kitchen by moving the motor to the outside of your home! Smart!

Step 1

CHOOSE THE RIGHT RANGEHOOD FOR YOUR KITCHEN

Step 2

CHOOSE THE RIGHT ISODRIVE
MOTOR SIZE

Step 3

CHOOSE WHERE THE ISODRIVE MOTOR WILL BE INSTALLED

Step 1 - Choosing the right rangehood for your kitchen

The choice of an appropriate rangehood size in relation to the cooking area is essential for a satisfactory technical operation.

INADEQUATE

Rangehood smaller than the cooking area
ADEQUATE

Rangehood equal to the cooking area
OPTIMAL

Rangehood bigger than the cooking area

Overhead Cabinet Rangehood Installation Position

It is also important to consider the bench-top and overhead cabinetry depth before installing the rangehood.
The information below is to be used as a guide only, drawings are not to scale and do not account for all circumstances.
The cooktop is centrally installed in the bench-top in the diagrams below.

When the overhead cabinetry is constructed and installed deeper than standard, ensure the rangehood is installed as close to the front as possible. This will increase the rangehood extraction results as there is a greater coverage of the cooktop surface area.

Step 2 - Choose the right IsoDrive Motor Size

The type of motor a Schweigen Quiet Rangehood will require depends on the level of suction the user demands from the rangehood. This all depends on the type of food you cook and the amount of cooking you undertake. A rangehood with sufficient power will ensure that all smoke, steam and odours are removed from your kitchen. The guide below will help you choose the right motor configuration.

S1 -
Minimal Cooking
650m3/hr

*Only available on selected or by special request.

ST -
Light Cooking
900 m3/hr
SP -
Heavy Cooking
1600 m3/hr
SP2 -
Supreme Cooking
3000 m3/hr
SE -
Ultimate Cooking
3200 m3/hr

Step 3 - Choosing where the IsoDrive Motor will be mounted

Depending on the size of the motor chosen, the IsoDrive motors can be mounted on roofs, walls and eaves. Please check the motor installation guides for more information.

ROOF MOUNTED
WALL MOUNTED
EAVE MOUNTED